HP LaserJet printer is an advanced printer that supports advanced technologies and updated features. It is a single function printer that prints only. This printer is the best support for official use and big project. To get the best use of this printer, you have to install the necessary printer drivers.
How do I install HP LaserJet 1020 Printer Drivers? It is a common question for the users of this printer. If you learn the techniques correctly, the process will be easier. From this step-by-step guide, you will be able to install all the necessary drivers yourself.
How Do I Install HP LaserJet 1020 Printer Drivers?
After connecting the HP LaserJet 1020 printer to the computer, Windows operating system cannot automatically install the built-in printer drivers. You can connect the printer through the wireless method, USB cable connection or Ethernet cable connection, and the driver installation process is the same. Follow the steps below and get your printer drivers on your computer easily.
Step-1: Remove Printer from All Devices
At first, you have to clear all the signs and names of the printer that you will use from the device or computer or the printer’s folder. To do it, follow the instruction.
If you have connected your printer to your computer through the USB cable, you have to disconnect the connection first. Then turn the printer off. Wait for a while, and then again, turn the printer on. For the following process, you have to be sure that the printer is ready to work. If not, wait until it becomes ready.
Press the Windows key and you will find the box to appear in front and then type “Devices” to search printer name. Click on “Devices and Printers” and find the name of your printer from the list. Right-click on your printer’s name and get a list where you will see the “Remove Devices” option. Now you will see the instructions coming one by one. Follow those instructions correctly. If you find multiple names of the same printer, remove all.
Step-2: Connect the Printer to Your Computer and Network
If you are ready to install the built-in drivers to the printer, you have to connect the printer to the computer and the network. Connection processes vary depending on the connection types. It can be a USB connection, wireless connection, and wired connection. We will describe all these methods in the next section. You have to follow the instruction of the connection method that you are going to connect.
In this process, you will need a USB cable in this process to connect the printer to the computer.
At first, turn your computer on and then connect to the internet. Now turn the printer ON. Take a USB cable and connect its one end to the printer’s rear side. And then connect another end to the computer.
When the computer finds the printer, it will open a Windows display as it detects new hardware. You can now follow the driver installation process as the prompts say. If you can install drivers and then you are ready to print. But if you cannot install the driver, then jump to the next section.
Wi-Fi (Wireless) Connection Process
If you have a wireless connection, this HP LaserJet 1020 Printer can be connected through a Wi-Fi connection. You have to use the Wireless Setup Wizard process, and you have to use a router supplying a network to support this WPS process.
You can make this connection process in two ways. You can connect the printer to the Wireless Setup Wizard or the WPS system.
Connection of the printer to the Wireless Setup Wizard
Generally, most of the printer models have the text navigation control panel or touchscreen that supports the settings of the Wireless Setup Wizard tool. You can find this tool in the Network or Wireless or Setup menu. If you have this option, enter the control panel, select the desired network name here, and provide the necessary information, including the password and the printer’s name.
In this process, at first, collect necessary items that include a network security password or passphrase that WEP key or WPA passphrase, a network name, the computer you will connect to the printer, and the wireless connection capable printer that you have to place near to the computer.
Now check if the printer, router, and computer are turned on. Make sure that the printer and the computer are connected to the same wireless connection through the router. You have to disconnect or remove other USB connections from the printer. Enter the printer control panel and then tap on Setup, or Wireless Menu, or Network menu. If you get the Wireless Setup Wizard, tap on it and then follow the instruction as they will come in front of the prompt message one by one.
Connect the printer to the Wi-Fi Protected Setup that is WPS
The HP LaserJet 1020 generally do not have the Wizard tool in this navigation panel or touchscreen. In this case, you have to set it up through another process: a WPS connection. To get this WPS connection, your printer and the router should have the WPS Push-button. You can contact the printer’s manuals to be sure of the presence of the push button. If there is no push button, you have to connect the printer to the network through the wired connection type.
In the printer control panel, you will see the Wireless button. Press on it or hold onto it for a few seconds to start it, and the wireless light will blink. Now press the wireless button on the router. Within two to three minutes, the printer-router network connection will be set.
Wired Connection Process
This process uses an Ethernet cable to connect the printer to the network.
At first, check if the network router has the Ethernet ports, keep the computer’s connection to the router properly, and collect an Ethernet cable.
Now turn the printer on and remove any protective cover or plug on the Ethernet cable of the printer. They connect one end of the cable to the printer and the other end to the router. The wired connection will be built now.
You have to set the automatic drover software downloads through Windows Device Installation Settings.
Enter the Windows box and then search “Change Device Installation Settings.” tap on it. Here you will see and have to select the “Yes” option and then click on “Save Changes.”
Step-4: Install Printer Driver by the Addition of Printer Wizard
This step uses the “Add printer” tool and then install the printer drivers.
- Enter the Windows key from the keyboard Windows button. Then search “Control Panel.” you will see the “Devices and printer” tab here. Enter into this section and click on the “Add Printer” option.
- Here you will see a window- “Choose a device or printer to add this PC.” Find the name of your printer from the list and click on it. You will have some on-screen instructions. Follow the instructions and install drivers.
- When you see that the printer’s name is not on the list, enter the option that let you select your printer that is not in the list. Then, click on “Add a local printer with a manual setting.” Tap on Next. Now you have to select the port that is connected by your printer. For example, USB001. Now click on Next.
- Tap on “Windows Update,” then wait for the update. Now select “HP” or “Hewlett-Pickard” and then click on the printer’s name on the printer’s pane.
- If the printer is on the list, then select Next. If it is not on the list, then tap on the back arrow from the upper left corner of the window. Click on “Find a printer by other options.” Here Select “Add a printer using the TCP or IP address or the hostname.” now click on Next.
- Now select Autodetect that is under device Type. Here you have to input the IP address and click Next. Now, wait for a few minutes to connect the printer to the computer. Then click on Next and Install the printer drivers.
After finishing the add printer setup, all the driver setup is complete and ready to use.
Also Read: How to Get Printer Online From Offline
HP LaserJet 1020 is a customer-preferable HP printer model. Though it is a monochrome printer, this printer can print professional-quality pages. Without the printer drivers, you will not get many benefits from this printer.
How do I connect HP LaserJet 1020 Printer Drivers? It is the most frustrating question when you do not have the answers. On this page, you have got all the details. Follow the instruction step-by-step and get all the necessary printer drivers on your computer. Now the printing job has become more accessible. You will be able to use all the functions with the support of drivers.